Description
12-1/2-Inch Planer Blades For Craftsman Surface Planer 351.21758, 351.27523, 21758, 217581, CMEW320 # 24797- Set of 2
- 12-1/2-Inch replacement knives for Craftsman Surface Planer 351.21758, 351.27523, 21758, 217581, CMEW320 # 24797
- Replacement CMZW320-2
- Made of High Speed Steel for longer cutting life
- Easy to install, Double-edged "reversable" high-speed steel construction
- Set of 2, Plastic case packaging
- Blade material: M2/SKH51/W6Mo5Cr4V2 Hardness: HRC 65-68°
The blades are ground with both a primary bevel and a secondary bevel close to the edge. The blades are razor sharp and ready to go.
Payment & Shipping
CA PROP 65 WARNING
Let customers speak for us
I didn’t buy this, just testing review authenticity!
Wasn't to sure if it would fit but it worked out good will probably get more for cutting wood working putting on table top
I purchased the cutter head for my dewalt planer. I can’t say enough good about this product. This turned my planer in to a completely different machine. If you’re on the fence about the cost I am here to say it is well worth the money. Turned an hour long job into a 10 minut job. I put it off for a long time and now I regret not doing it sooner.
Wasn’t good booklet but YouTube was great. Once installed was the awesome bit it’s absolutely amazing so quiet and a wonderful finish on the results. Well worth it.
I was hesitant spending this amount without knowing if the reviews were true to their word. Fortunately my machining background in cutting tools helped make the decision to go ahead. No regrets! This tool exceeded my expectation. It cuts much quieter, cuts much smoother, less load on the machine allows for a deeper cut. This is a worth while tool.
Items arrived from China within the stated time with frequent shipping updates. Smooth transaction from ordering to delivery with no hidden costs. Very competitively priced. Had to trim width to fit the 20mm pulley wheel which wasn’t a problem and to be expected. Fitted tyre after soaking in hot water, clamping and using wooden dowel to ease the tyre on with some stretching. Plenty of advice online. Fits perfectly and does the job! Seems of good quality but time will tell and urethane should last. Very pleased with the product so far.
STAY AWAY FROM THIS COMPANY.
Here is a bit of the 9 emails so far. They keep asking questions, etc. etc. and even asking for me to take and send pictures of the blades side by side. They sent the wrong product and are refusing to make it right.
"Annie
Jan 20, 2025, 9:59 AM (5 days ago)
to me
please not worry, what are you old blades photo and received blades photo.
so i can help you"
I repled then I get:
"sorry about this matter again, what are your brand and model?
also what are you purchased them elsewhere.
please let me know link, so i can check what are error, this is ok?
thanks again"
ARE THEY SERIOUS? Pictures and a link from where I got the correct product? Then they go silent
My reply:
"Part of the email.."Here is a picture of the 2 blades side by side. They are not cut right, and you can see the difference and the holes do not line up. We have tried multiple times to make them work and they do not. It has also been 4 days since your last communication and 9 since I have requested the return."
Very very satisfied with this purchase! Talk about a game changer! Noise difference is unbelievable! Not to mention how well it cuts! Installation was pretty simple and straight forward. Fit perfectly and works even better!
It worked great! It cut straight and clean on a piece of 1 1/4" heavy DOM. Went nice a smooth with no heating of the part. For the money, this is a good deal.
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These work like any other blade that I have purchased. I have not necessarily found any great difference between the most expensive brands and the lower priced brands since I tend to challenge the blade with all types of materials. I would lump this in the mix and buy these based upon the price. At a dollar and a half, for each blade, these are on the very affordable side of what is available. I have sometimes used long metal blades for demolition if I have a large amount of metal embedded (could be conduit, etc.).
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case --- Received 25 blades as advertised. Haven’t had occasion to use one yet but they are thinner metal, but solid and sharp. Demolition blades are usually bulkier than these. Fit easily into my Dewalt battery operated reciprocating. saw. Plastic case is adequate for keeping them together but doesn’t look like it would take much abuse.
Partial review only, as I need to put these through their paces. The blades are well formed and have no obvious flaws. No curves, errors, etc. The case could use a bit more strength, though, as both pieces of mine are cracked.
I have an old craftsman jointer that desperately needed blades. I bought these and am super happy. Swapped the old ones out and the jointer is back to life. Blades were dharp and flat which is all that's necessary. I'll buy this brand again when I need another set!
What customers think about the store
Store offers quality woodworking tools and replacement parts at competitive prices. Customers appreciate sharp, well-packaged blades and helpful customer service. Shipping from overseas typically takes 1-3 weeks but is reliable with tracking. Products fit well...
AI-generated from customer reviews.
This is a popular blade design, which should fit several brands of 12.5" planers. I've seen identical blades advertised with compatibility for Delta, Craftsman, Porter Cable, Grizzly, Triton, and others. So I'm sure these will have the same compatibility. These blades fit perfectly in my old Delta 22-560.The cut is really smooth. Sharp blades make a huge difference... less stress on the motor, less noise, more efficient cutting, better quality cut. These are super sharp out of the box. I was extremely careful handling them for the photos. The quality seems to be very good. I posted several close-up photos so you can see the details. They are precision-ground HSS. So should stay sharp for a long time. They are reversible, so when they get dull, you just flip them around.Installation is very easy and quick. On my set-up, half the battle is removing my dust collection shroud. My planer has a tool built-in to the body which is all you need for installation and is designed for the correct torque.All in all, these are high-quality replacement blades for a 12.5" planer. No difference versus OEM blades except the price, which is less than half. At this price point, there's no reason to suffer with dull blades.
I needed a new set of blades for a craftsman planer and they are 50 bucks locally. I’m glad I stumbled on foxbc.com. Blades are exact matches and way cheaper. I’ll be ordering some circular saw blades in the near future to try them out.
Correct fit, properly and securely packaged, reasonably priced quality blades.
They do a great job
Blades for a Craftsman portable planer. Not the heaviest duty. Treated wood nicked the blades...
Perfect replacement for hard to find OEM blades
works great
The blades worked great. Keep their sharp edges. I made bedroom furniture which include a king bed head and foot board, dresser with mirror and 6 drawer chest of drawer and the blades are still sharp from all the planning of the the wood.
Muy buen el producto justo lo que pedí para mi maquina
These blades have only been used a couple of times but the quality of cut is excellent. I have tried several different brands and so far, these seem to cut better. I'm not sure of how long these will last as I've only used them a couple of times, but I am hoping they last quite a while longer than some of the other brands I've purchased.